Color Kinetics iColor Cove
DMX Capable
TWO LAMPS! NEW IN BOX!
These 12-inch multi-color LED cove/accent lamps produces FABULOUS colorful light shows by itself, or via DMX lighting control! Several built-in light shows such as 'COLOR WASH' and 'VARIABLE COLOR STROBE' (see below) can be pre-set with the DIP switches on the rear. Or use a DMX controller (with Color Kinetics PDS-150e power/data supply) for external DMX control. Over 16 million colors! Use for parties, architectural lighting, effects, or mood lighting. Requires 24 volts DC power supply! Ready to go!
Here is a *LIVE* web cam view so you can see the iColor Cove in action!
The iColor Cove is perched above the sign toward the right!
Color Kinetics® iColo® iColor® Cove is an award-winning digital color-changing cove light. It brings color changing light and lighting effects to alcoves, task areas, accent areas and other tight spaces without the drawbacks, expense or constraints of conventional colored lighting methods.
iColor Cove is modular in design, and projects a soft-edge strip of light at a 110° beam angle. Each length of iColor Cove in an installation can be individually controlled either by the on-board controller or by an external controller. Using an external controller, a run of multiple iColor Cove units can be set to dynamic sequences such as the Chasing Rainbow, or synchronized to produce a soothing, uniform visual effect.
iColor Cove is available in fixed lengths of six (6) and twelve (12) inches. Each segment is cased in a low-profile, vented, molded plastic housing. The housing snaps directly into a one-piece mounting clip; there is no need to open the case to mount the segment. The mounting clips are indexed to lock the iColor Cove into place, allowing for the uniform alignment of multiple fixtures as well as the easy rotation of fixtures.
To connect to power and data, each segment is equipped with a three-pin header that attaches to a master cable, making installations with curves or complicated geometry easy to install. Each master cable is designed to be hardwired to a PDS-150e, which supplies power and data to all connected lights.
iColorCove SPECIFICATIONS
- COLOR RANGE 16.7 million (24bit) additive RGB colors; continuously variable intensity
- SOURCE High brightness colored LEDs
- BEAM ANGLE 110° x 40°
- HOUSING Two-piece vented plastic
- CONNECTORS 3-pin power and data connector for use with master cable; master cable unterminated for use with Color Kinetics PDS-150e
- LISTINGS C-UL US Listed, CE certified
COMMUNICATION SPECIFCATIONS
- DATA INTERFACE Color Kinetics data interface system (DMX capable)
- CONTROL Color Kinetics full line of controllers, DMX512 (RS485) compatible when using Color Kinetics power/data supply, and Stand Alone
ELECTRICAL SPECIFICATIONS
- POWER REQUIREMENT 24 VDC
- POWER CONSUMPTION Maximum: 4.2 Watts (6-inch) Maximum: 6 Watts (12-inch)
- POWER SUPPLY PDS-150e (ITEM# 109-000008-01); PDS-60 24V (ITEM# 109-000017-XX)
- MASTER CABLE Wire Harness for iColor Cove (ITEM# 108-000013-00),
DESCRIPTION OF SHOWS
- FIXED COLOR Static display of a single color
- COLOR WASH Colors transition gracefully from color to color, cycling through the entire color wheel
- CROSS FADE Colors cycle back and forth gracefully between two colors
- RANDOM COLOR Colors step or jump from one color to the next in random order
- FIXED COLOR STROBE A constant color appears in a rapid series of intense flashes of light
- VARIABLE COLOR STROBE A sequence of colors appear in a rapid series of intense flashes of light
More Information:
- iColorCove Data Sheet (PDF)
- iColorCove User Guide (PDF)
- iColorCove DMX Wiring Diagram (PDF)
Color Wash photos:
